Energy Savings System

• Free or occupied room: by a guest or employee.
• If the room has been made-up for the new guest.
• Average time per employee per room.
• Employee management: know if DND or MUR has been selected.
• Minibar status: if it has been opened or not, just once.
• Room temperature, if there is a motion sensor.
• Maintenance: low battery indication.
• Reports if the failure has been fixed.

The smartest saving

The system allows optimizing energy consumption at hotels and makes room management easier.

• Energy Saving
  • Avoids unnecessary energy consumption when the guest is out (E.g. air conditioning consumption in an empty room)
• Intelligent
  • Only works with the valid card for each installation.
• Comfort
  • Once the card is removed, courtesy time follows before the energy is cut off. Automatic temperature adjustment possible.

ENERGY SAVING: It turns the power off when the guest leaves the room, to prevent air conditioning, lighting…to be left on.
>INTELLIGENT: It only works with a valid card for each installation.
>COMFORT: Temporized courtesy light and the possibility to control the access to the minibar, phone, water…
>MULTIAPPLICATION: It uses the same credential use for room access. (Mifare 1k)
>NO CONNECTIVITY: not compatible with sensors nor iVIEW software.

ENERGY SAVING: It turns the power off when the guest leaves the room, to prevent air conditioning, lighting…to be left on.
>INTELLIGENT: It only works with a valid card for each installation.
>COMFORT: Temporized courtesy light and the possibility to control the access to the minibar, phone, water…
>MULTIAPPLICATION: It uses the same credential use for room access. (Magnetic Stripe)
>NO CONNECTIVITY: not compatible with sensors nor iVIEW software.

ENERGY SAVING: It turns the power off when the guest leaves the room, to prevent air conditioning, lighting…to be left on.
COMFORT: Temporized courtesy light and the possibility to control the access to the minibar, phone, water…

ENERGY SAVING: It turns the power off when the guest leaves the room, to prevent air conditioning, lighting…to be left on.
COMFORT: Temporized courtesy light and the possibility to control the access to the minibar, phone, water…
MULTIAPPLICATION: It uses the same credential use for the room opening.

ENERGY-SAVING. Switch off the energy when the guest leaves the room, avoiding the air conditioning, lighting to be left on.
INTELLIGENT. It only works with a valid card for each installation.
COMFORT: Temporized courtesy time and the possibility to control access to the minibar, phone, water, etc…
MULTIAPPLICATION: It uses the same credential use for the room opening (RFID Mifare)
NO CONNECTIVITY: not compatible with sensors nor iVIEW software.

ENERGY SAVING: Switch off the energy when the guest leaves the room, avoiding the air conditioning, lighting to be left on.
INTELLIGENT: It only works with a valid card for each installation.
COMFORT: Temporized courtesy time and the possibility to control access to the minibar, phone, water, etc…
MULTIAPPLICATION: It uses the same credential use for the room opening (RFID Mifare).
NO CONNECTIVITY: not compatible with sensors nor iVIEW software.

ENERGY SAVING: It turns the power off when the guest leaves the room, to prevent air conditioning, lighting…to be left on.
CARDLESS.: No card is required to operate.
COMFORT: Temporized courtesy light and the possibility to control the access to the minibar, phone, water…
WIRELESS COMMUNICATION WITH SENSORS.: It receives the information sent by sensors and acts accordingly.

ENERGY SAVING: It turns the power off when the guest leaves the room, to prevent air conditioning, lighting…to be left on.
INTELLIGENT: It works only with a valid card for each installation.
COMFORT: Temporized courtesy light and the possibility to control the access to the minibar, phone, water…
WIRELESS COMMUNICATION WITH SENSORS: It receives the information sent by sensors and acts accordingly.

ENERGY SAVING: It turns the power off when the guest leaves the room, to prevent air conditioning, lighting…to be left on.
INTELLIGENT.: It works only with the valid card for each installation.
COMFORT: Temporized courtesy light and the possibility to control the access to the minibar, phone, water…
WIRELESS COMMUNICATION WITH SENSORS: It receives the information sent by sensors and acts accordingly.

ENERGY SAVING: Switch off the energy when the guest leaves the room, avoiding the air conditioning, lighting to be left on.
INTELLIGENT: It only works with a valid card for each installation.
COMFORT: Temporized courtesy time and the possibility to control access to the minibar, phone, water, etc…
MULTIAPPLICATION: It uses the same credential use for the room opening (RFID Mifare).
NO CONNECTIVITY: not compatible with sensors nor iVIEW software.

WIRELESS COMMUNICATION: It detects room occupancy and has wireless communication with the energy saver.
STANDALONE: Battery operated.
INSTALLATION: Overhead surface mounted on the ceiling.
SEVERAL SENSORS: Several sensors can be installed in the room.
TEMPERATURE SENSOR: temperature sensor embedded.

WIRELESS COMMUNICATION: it detects room occupancy status and by means of wireless communication informs the energy saver.
STANDALONE: Battery operated.
INSTALLATION: Recessed overhead mounted on the ceiling.
SEVERAL SENSORS: More than one sensor can be placed on the room.
TEMPERATURE AND HUMIDITY SENSORS EMBEDDED

ENERGY SAVING: It turns the power off when the guest leaves the room, to prevent air conditioning, lighting…to be left on.
CARDLESS.: No card is required to operate.
COMFORT: Temporized courtesy light and the possibility to control the access to the minibar, phone, water…
WIRELESS COMMUNICATION WITH SENSORS.: It receives the information sent by sensors and acts accordingly.

WIRELESS COMMUNICATION: it detects the door and/ or window status and informs the energy saver.
STANDALONE: Battery operated.
INSTALLATION: It can be installed either inside the door or window (non-metallic recommended).
EASY TO INSTALL
CONCEALED: It stays hidden inside the door or window, providing more safety against tampering.

LIFT BUTTON CONTROL: Actives the lift’s button by approaching the hand.
CONTACTLESS: increased health and safety measures by avoiding contact with the lift button.
INSTALLATION: wall mounted (surface or recess mounted)

WIRELESS COMMUNICATION: it detects room occupancy status and by means of wireless communication informs the energy saver.
INSTALLATION: Recessed overhead mounted on the ceiling.
SEVERAL SENSORS: More than one sensor can be placed in the room.
TEMPERATURE AND HUMIDITY SENSORS EMBEDDED

BLE Technology options

BUTTONS: The device has 2 capacitive buttons to select between “Do not disturb”-DND or “makeup room”- MUR.
WIRELESS COMMUNICATION WITH THE ENERGY SAVER
“DND” OR “MUR” data to the iVIEW software
STANDALONE OPERATING WAY / ENERGY SAVER ENABLED OPERATING
MODE CONFIGURATING SWITCHES: night mode, position light, standalone mode.
INSTALLATION. Wall mounted (surface or recess mounted).

SOS ALERTS: When the guest pushes the button, sends an alert to the iVIEW software or to an email address.
WIRELESS COMMUNICATION: It has wireless communication with the energy saver.
STANDALONE: Battery operated.
INSTALLATION: Mounted on the bathroom wall.
EASY TO INSTALL: Fixed or screwed.

STATUS INDICATOR. The bar shows the choice made by the guest with the button. Red (Do not disturb- DND) / Green (Makeup room o MUR)/Blue (occupied room)
WIRELESS COMMUNICATION WITH THE ENERGY SAVER
BUTTON. A capacitive button (optional).
STANDALONE OPERATING WAY / ENERGY SAVER ENABLED OPERATING
MODE CONFIGURATING SWITCHES: push mode, night mode, occupancy light, standalone mode.
INSTALLATION: Wall mounted (surface or recess mounted)

WIRELESS COMMUNICATION: it detects occupancy and has wireless communication with the energy saver.
STANDALONE: Battery operated.
INSTALLATION: Wall-mounted (surface or recess mounted)
SEVERAL SENSORS: Several sensors can be placed in the room.
HUMIDITY AND TEMPERATURE SENSOR: Temperature and humidity sensors embedded.

WIRELESS COMMUNICATION: It detects the door/window status and sends the information to the energy saver.
STANDALONE: Battery operated.
EASY TO INSTALL
ASSEMBLY: It can be installed either inside the door or window (non-metallic recommended).

CONTACTLESS: By approaching the card/bracelet to the encoder.
READ/ENCODE: It allows reading and encoding the compatible card/bracelets
ILUMINATION: Led illuminated front case.
MULTITECHNOLOGY
BEEP: indicating the correct or incorrect tag encoding.

WIRELESS COMMUNICATION WITH THE ENERGY SAVER: It works as a connection between the energy saver and the gateway, for those places where the signal is not received.
SMALL SIZE
SYNCHRONIZATION: Easy to synchronize it with the gateway using an inner button.

HANDHELD DEVICE: for iSwitch wireless systems
CHECK ENERGY SAVER’S & SENSOR’S STATUS
UPDATE ENERGY SAVER’S: Change courtesy time, relay mode, …
WIRELESS SIGNAL STRENGTH DETECTION: check the coverage from the energy saver to the sensor.
CONFIGURATION OF ENERGY SAVERS: enables configuring energy saver’s parameters during the starting up.

WIRELESS COMMUNICATION WITH THE ENERGY SAVER: It receives the room status from the energy savers and sends the information to the iVIEW software.
COMMUNICATION HUB: It works as a link between the energy savers and the iVIEW software.
GATEWAY PER FLOOR
MAX. ELEMENTS: Up to 50 energy savers and 19 sensors per energy saver.nd makes the flow of data among energy and reception PC quicker