2800-b2 EL2800

Four-Door/ 8-reader controller

EL2800 is an advanced multi-door IP controller. EL2800 uses native LAN (not a terminal server which converts RS232 to LAN). Consequently, it is like a PC and can take full advantage of web access. EL2800 provides access control functions for 4 doors. Entry and Exit readers are RS485 based and are connected by 4 wires in daisy-chain mode. Door sense signals and exit push button signals are directly wired to EA284 4 port Hub.
  Separate control unit – high security
  122x32 GLCD display and 16-key keypad
  Reader support: Supports Weigand format (FreeWiegand, 26-bit, HID)
  Stores up to 3,000 user-IDs and 2,000 offline transactions per door

Large database of 8,000 card users and 3,000 offline transactions per door. 

  Support SD card for super huge transactions & card holders

Configuration setup through web-browser


24 timers and 10 time zone


Card, Card + PIN, PIN 


Supports Global Anti-Passback 

Flash memory allows easy upgrade


Communication Interface: Multi-drop or RS485 or TCP/IP (with LAN module)


 Communication Interface  TCP/IP or Multi-drop or RS485 (3-wire)
 Output  4 (On-board), 8 (with EA62)
 Input  8 (On-board), 16 (with EA62)
 Power Supply  12 VDC
 Current Consumption  500 mA
 Card Database  8,000 per door
 Transaction Database  3,000 per door
 Card Format  Wiegand 26-bit, Free Wiegand
 Operation Mode  3 (Card, Card + PIN, PIN) 
 Time Zone  10
 Timer  24
 Holiday  20
 Adjustable Lock Release Time  Yes
 Permanent Lock Release  Yes
 Automatic Pin Disable Time Zone  Yes
 Automatic Lock Release Time Zone  Yes
 Inhibit Access  Yes
 Continuous Swiping  Yes/No
 Global Anti-Passback  By 8-reader



EL2800 Standard Configuration

EL2800 System Configuration 

Ordering Information


 Product Code
 EA-0062-001  ERM845/B RS485 Short Range Proximity Reader, Black  (EM compatible) - 85(H)x45(W)x15(D) mm 
 ER-0846-001  EK846R/B RS485 Serial Keypad (Rubber) with GLCD Display, Black, built-in with EM reader module - 115(H)x90(W)x35(D) mm 
 ER-0847-B01  EK847R/B RS485 Serial Keypad (Rubber) with LED Display, Black, built-in with EM reader module - 115(H)x90(W)x35(D) mm 

 EA45 Reader Converter, Wiegand to RS485, in Plastic Housing

 Note:  EA45 Reader Converter need to be added to work with standard range of ELID readers with Wiegand output. 
 EA-0062-001   EA62 Peripheral Module with 8 supervised inputs and 4 relay outputs 
 EA-0284-001  EA284 4 Port HUB 


 Access Control Unit



 EL2307 4-Door 8-Reader IP Access Controller 

 Product Code: EL-2800-001

 I/O Expansion Module




 EA62 Peripheral Module (8 inputs and 4 outputs)

 Product Code: EA-0062-001




 EA284 4 Port HUB

 Product Code: EA-0284-001


 EP23S Power Supply, 12V/2.5A Switching c/w PS2 

 Product Code: EP-0023-003





 EP67 Power Supply, 13.8V/6.7A Switching 

 Product Code: EG-PS67-001




 Metal Casing

 Product Code: CS-1099X

 Entry Keypad c/w Reader



 EK846R/B RS485 Keypad with GLCD Display c/w EM reader 

 Product Code: ER-0846-001





 EK847R/B RS485 Serial Keypad with LED Display c/w EM reader 

 Product Code: ER-0847-B01

 Entry/ Exit Reader



 ERM845/B RS485 EM Reader

 Product Code: ER-0845-B01




 EM Proximity Card

 Access Management Software


 Single-workstation Access Management Software




 Multi-workstation Access Management Software




 EL70R Communicator, RS485 to USB

 Product Code: EL-070R-001


 EL70W Communicator, RS485 to USB, Built-in with Softkey II (Software to

 be programmed)

 Product Code: EL-070W-001



 EL70Y Communicator, Multidrop/RS485 to USB, with software key slot

 Product Code: EL-US70-G02

I like very much this iPage Hosting Review because this is based on customer experience. If you need reliable web hosting service check out top list.

shadow3Copyright 1989-2012 ELID Technology International Inc. All Rights Reserved